Hello All,
After converting a Server 2012 machine (which is running Hyper-V) and starting in VMware vSphere 5.5 I get a BSOD and system_thread_exception_not_handled winhv.sys
I know that I might need to disable Hyper-V, anything else it could be?
~eric
Good afternoon, I have been trying to convert 2 servers for about a week now. They are running Redhat 5.5. I have been running into all sort of issues. In the beginning the servers would not query and i got passed that but now i have been stuck with this message since yesterday. I have looked at the Forums and I still have not moved anywhere. All I am trying to do is convert 2 old servers to my new esxi server. Please help!! The converter gets to about 3 percent and then Fails.
FAILED: A general system error occurred: connect (`129.166.9.205'): Network is unreachable connect (`129.166.9.205'): Network is unreachable connect (`129.166.9.205'):
Network is unreachable Network error. Host 129.166.9.205 key can't be retrieved. (return code 2)
I will attach my log if that will help.
I'm running vmware-vdiskmanager -R against a VMDK file that produces "the virtual disk is invalid or needs to be repaired" errors in VCenter Converter. vmware-vdiskmanager does NOT report anything; it just silently returns to the command prompt after a second or two and does not fix the problem.
vdisk-vdiskmanager -e reports: Disk chain is consistent.
Now what? What to do when vmware-vdiskmanager -R does not fix the problem?
help: see attached documents.
i know the OS it not officially supported, but i need to convert this machine.
i have no idea now much info is in the diagPack to
local machine conversion to vmware server 2.x
-DESTINATION-
CPUs: 2
RAM: 1024
1 hard drive 50GB
2 NICs both bridged.
251GB free of destination disk
ERROR-
FAILED: Unable to create a VSS snapshot of the source volume(s). Error code: 2147754754 (0x80042302).
Hello,
I am running an Ubuntu server on LINODE
I managed to download and .img file of it.
How do I convert it to a Virtual Machine that can be used in VMWARE Fusion 8?
Can I use the Converter Standalone?
Hi Folks,
Am converting a DMZ server and am getting "a general system error occurred: unknown internal error" just as im clicking finish on the VM converter.
I have followed this KB and have opened up the ports on the firewall to the VSphere host server, do i need to open the same ports on the VMHOST server as well?
thanks
Well i'm converting a 2012 server on to esxi, but as i start the conversion i get the error from the Topic. My pc is on win10. agent is well installed on the server, i've did other servers in the past.
What's missing ?
PS: maby there is some magic out there to find that vstor2 driver to !
Thanks !
or boot loader configuration file. Error: Windows VM Converter Standalone 6 trying to p2v powered on remote linux machine.
Here is my grub.conf.
#
# GRUB configuration file
#
# General configuration
background ffffff
color black/cyan black/light-gray
default 0
foreground 000000
hiddenmenu
splashimage (hd0,3)/boot/grub/3comSplash.xpm.gz
timeout 10
# Serial configuration
serial --unit=0 --speed=9600 --word=8 --parity=no --stop=1
terminal serial
# OS Installation 'A'
title VCX Linux
root (hd0,1)
kernel /boot/vmlinuz ro root=LABEL=/A quiet console=ttyS0,9600n8
initrd /boot/initrd.img
Is there anything that I can edit to make this work?
Thanks!
Hi folks,
Have a question on ports required to P2V a server to vCenter server cluster (not directly to ESXi host) with the standalone converter tool installed directly on the source.
Do I need to open the firewall ports from source to vCenter cluster IP or to the individual vCenter servers and to all ESXi hosts in the HA cluster as well ?
Source machine with Standalone Converter Installed ==>> Destination vCenter Server Cluster
from Source machine TCP 443 undirectional to vCenter cluster IP for vCenter communications.....and to individual vCenter servers in the vcenter cluster and all ESXi hosts??
from source machine TCP 902 unidirectional to vCenter server cluster IP for cloning process.....and to individual vCenter servers in the vcenter cluster and all ESXi hosts??
Thank you for your help in advance!!!
Trying to P2V a server and having some quite major issues, I've attached the log file.
So far I've tried different versions of converter, tried a direct link between Physical box and host for conversion using a crossover, P2V individual drives, the best I have had so far is it seemed to complete but this was making the destination one RAID set on RAID 5 its really quite strange.
Just wondering if anyone has experienced this before and can help narrow it down.
Hello all,
I am usind vmWare vCenter Converter Standalone 5.0 to run a P2V on a server that is running Windows 2003. I have ran two different P2V's this 2003 server with success over the past three week. I am tryng to run another P2V on this server now. On the deploying of the agent I receive the following error "Unable to complete vCenter Converter install. Error code 1,603".
Any suggestions on how to resolve this issue?
Why would this error start now after running successfully, everything I was reading was saying to check port settings, none o those have changed.
Thanks for your help..
I am using the latest VMware Converter Standalone 4.0.1 to p2v a physical
Windows 2000 Professional SP4 PC. The PC is a standard Pentium with IDE
disk from circa 2001. The disk is 20GB partitioned logically into C:
and D. It converts with no errors (I did both disks into one VMDK).
When I power on the VM in VMware Workstation 6.5 (or Vmware Player
2.5) it gets to the Win 2000 boot graphic then I get a BSOD with the
classic 0x7B Stop error: inaccessible_boot_device.
Is there anything I can do to get the vm to boot? I am lost for ideas, normally p2v of a basic IDE pc works flawlessly.
The source PC does not have a NIC, so I installed Converter onto the PC and selected "Local machine" for the source option. I used an external USB as the destination, which worked fine.
I can mount the resultant VMDK with the vmware-mount tool with no issues. It just won't boot!
2013-12-30T18:32:22.820+08:00 [03632 error 'Default'] [task,350] [LRO] Unexpected Exception: converter.fault.ManagedDiskOpenFault
2013-12-30T18:32:22.820+08:00 [03632 info 'Default'] [task,379] [task-5] -- ERROR -- Convert: converter.fault.ManagedDiskOpenFault
--> (converter.fault.ManagedDiskOpenFault) {
--> dynamicType = <unset>,
--> faultCause = (vmodl.MethodFault) null,
--> msg = "",
--> }
Hello,
I am attempting to P2V a Linux server using the VMWare Standalore Converter v6.
The Linux server is a DMZ server secured with PrivateKey and passphrase. The SSH is listening on port 33001 instead of 22.
Few things to mention about the environment is that,
When I stat the P2V, it proceeds with the initial VM creation in VMWare and loads the temp OS. The job fails at 3% with the below error in the log file:
It seems to me that after the helperVM OS is loaded it is trying to access the source server and fails as the HelperVM doesn't have the private key or passphrase.
| converter-gui-7.log |
|---|
2017-03-23T18:23:23.163Z verbose converter-gui[06944] [Originator@6876 sub=ConverterDataProviderImpl] Converter::Client::Gui::Wizard::ConverterDataProviderImpl::PropertyCollectorThread[135] - (vmodl.query.PropertyCollector.UpdateSet) { --> version = "135", --> filterSet = (vmodl.query.PropertyCollector.FilterUpdate) [ --> (vmodl.query.PropertyCollector.FilterUpdate) { --> filter = 'vmodl.query.PropertyCollector.Filter:session[52b34711-17f0-f8c5-32fd-78f92b9fddfa]525198f0-828b-a0b3-718c-010b9b21a975', --> objectSet = (vmodl.query.PropertyCollector.ObjectUpdate) [ --> (vmodl.query.PropertyCollector.ObjectUpdate) { --> kind = "modify", --> obj = 'converter.task.Task:task-8', --> changeSet = (vmodl.query.PropertyCollector.Change) [ --> (vmodl.query.PropertyCollector.Change) { --> name = "event[89]", --> op = "add", --> val = (converter.event.UnixP2VVolumeCloneFailedEvent) { --> key = 89, --> chainId = 79, --> type = "error", --> createdTime = "2017-03-23T18:23:23.116526Z", --> userName = "Administrator", --> fullMessage = "Unable to clone the volume mounted on '/boot' from 'server12.london.comp.local'.", --> job = <unset>, --> hostName = "server12.london.comp.local", --> sourceMountPoint = "/boot", --> reason = (converter.fault.CloneFault) { --> faultCause = (vmodl.MethodFault) null, --> description = "Warning: Permanently added the ECDSA host key for IP address '[172.16.0.66]:33001' to the list of known hosts. --> Permission denied (publickey,gssapi-keyex,gssapi-with-mic). --> /bin/tar_1.28: This does not look like a tar archive --> /bin/tar_1.28: Exiting with failure status due to previous errors --> --> /usr/lib/vmware-converter/bin/ssh -z -F /usr/lib/vmware-converter/ssh.conf john@server12.london.comp.local -i /usr/lib/vmware-converter/helper.pem -p 33001 "sudo tar --one-file-system --sparse -C '/boot' -cf - ." | /bin/tar_1.28 --numeric-owner --delay-directory-restore -C '/mnt/p2v-src-root/boot' -y -xf - --> (return code 2)", --> msg = "An error occurred during the conversion: 'Warning: Permanently added the ECDSA host key for IP address '[172.16.0.66]:33001' to the list of known hosts. --> Permission denied (publickey,gssapi-keyex,gssapi-with-mic). --> /bin/tar_1.28: This does not look like a tar archive --> /bin/tar_1.28: Exiting with failure status due to previous errors --> --> /usr/lib/vmware-converter/bin/ssh -z -F /usr/lib/vmware-converter/ssh.conf john@server12.london.comp.local -i /usr/lib/vmware-converter/helper.pem -p 33001 "sudo tar --one-file-system --sparse -C '/boot' -cf - ." | /bin/tar_1.28 --numeric-owner --delay-directory-restore -C '/mnt/p2v-src-root/boot' -y -xf - --> (return code 2)'" --> } --> } --> } --> ], --> } --> ], --> } --> ], --> truncated = <unset> --> } 2017-03-23T18:23:36.350Z verbose converter-gui[06944] [Originator@6876 sub=ConverterDataProviderImpl] Converter::Client::Gui::Wizard::ConverterDataProviderImpl::PropertyCollectorThread[136] - (vmodl.query.PropertyCollector.UpdateSet) { --> version = "136", --> filterSet = (vmodl.query.PropertyCollector.FilterUpdate) [ --> (vmodl.query.PropertyCollector.FilterUpdate) { --> filter = 'vmodl.query.PropertyCollector.Filter:session[52b34711-17f0-f8c5-32fd-78f92b9fddfa]525198f0-828b-a0b3-718c-010b9b21a975', --> objectSet = (vmodl.query.PropertyCollector.ObjectUpdate) [ --> (vmodl.query.PropertyCollector.ObjectUpdate) { --> kind = "modify", --> obj = 'converter.task.Task:task-8', --> changeSet = (vmodl.query.PropertyCollector.Change) [ --> (vmodl.query.PropertyCollector.Change) { --> name = "info.estimatedTimeRemaining", --> op = "assign", --> val = 0 --> } --> ], --> } --> ], --> } --> ], --> truncated = <unset> --> } 2017-03-23T18:23:37.772Z verbose converter-gui[06944] [Originator@6876 sub=ConverterDataProviderImpl] Converter::Client::Gui::Wizard::ConverterDataProviderImpl::PropertyCollectorThread[137] - (vmodl.query.PropertyCollector.UpdateSet) { --> version = "137", --> filterSet = (vmodl.query.PropertyCollector.FilterUpdate) [ --> (vmodl.query.PropertyCollector.FilterUpdate) { --> filter = 'vmodl.query.PropertyCollector.Filter:session[52b34711-17f0-f8c5-32fd-78f92b9fddfa]525198f0-828b-a0b3-718c-010b9b21a975', --> objectSet = (vmodl.query.PropertyCollector.ObjectUpdate) [ --> (vmodl.query.PropertyCollector.ObjectUpdate) { --> kind = "modify", --> obj = 'converter.task.Task:task-8', --> changeSet = (vmodl.query.PropertyCollector.Change) [ --> (vmodl.query.PropertyCollector.Change) { --> name = "info.completeTime", --> op = "assign", --> val = "2017-03-23T18:23:37.77278Z" --> }, --> (vmodl.query.PropertyCollector.Change) { --> name = "info.error", --> op = "assign", --> val = (converter.fault.CloneFault) { --> faultCause = (vmodl.MethodFault) null, --> description = "Warning: Permanently added the ECDSA host key for IP address '[172.16.0.66]:33001' to the list of known hosts. --> Permission denied (publickey,gssapi-keyex,gssapi-with-mic). --> /bin/tar_1.28: This does not look like a tar archive --> /bin/tar_1.28: Exiting with failure status due to previous errors --> --> /usr/lib/vmware-converter/bin/ssh -z -F /usr/lib/vmware-converter/ssh.conf john@server12.london.comp.local -i /usr/lib/vmware-converter/helper.pem -p 33001 "sudo tar --one-file-system --sparse -C '/boot' -cf - ." | /bin/tar_1.28 --numeric-owner --delay-directory-restore -C '/mnt/p2v-src-root/boot' -y -xf - --> (return code 2)", --> msg = "An error occurred during the conversion: 'Warning: Permanently added the ECDSA host key for IP address '[172.16.0.66]:33001' to the list of known hosts. --> Permission denied (publickey,gssapi-keyex,gssapi-with-mic). --> /bin/tar_1.28: This does not look like a tar archive --> /bin/tar_1.28: Exiting with failure status due to previous errors --> --> /usr/lib/vmware-converter/bin/ssh -z -F /usr/lib/vmware-converter/ssh.conf john@server12.london.comp.local -i /usr/lib/vmware-converter/helper.pem -p 33001 "sudo tar --one-file-system --sparse -C '/boot' -cf - ." | /bin/tar_1.28 --numeric-owner --delay-directory-restore -C '/mnt/p2v-src-root/boot' -y -xf - --> (return code 2)'" --> } --> }, --> (vmodl.query.PropertyCollector.Change) { --> name = "info.state", --> op = "assign", --> val = "error" --> }, --> (vmodl.query.PropertyCollector.Change) { --> name = "info.transferRate", --> op = "assign", --> val = <unset> --> } --> ], --> } --> ], --> } --> ], --> truncated = <unset> --> } 2017-03-23T18:23:37.897Z verbose converter-gui[06944] [Originator@6876 sub=ConverterDataProviderImpl] Converter::Client::Gui::Wizard::ConverterDataProviderImpl::PropertyCollectorThread[138] - (vmodl.query.PropertyCollector.UpdateSet) { --> version = "138", --> filterSet = (vmodl.query.PropertyCollector.FilterUpdate) [ --> (vmodl.query.PropertyCollector.FilterUpdate) { --> filter = 'vmodl.query.PropertyCollector.Filter:session[52b34711-17f0-f8c5-32fd-78f92b9fddfa]529419b5-c025-98e3-aa90-4c02e62315d9', --> objectSet = (vmodl.query.PropertyCollector.ObjectUpdate) [ --> (vmodl.query.PropertyCollector.ObjectUpdate) { --> kind = "modify", --> obj = 'converter.server.conversion.ConversionJobHistoryCollector:session[52b34711-17f0-f8c5-32fd-78f92b9fddfa]52900437-ca19-0369-94db-655228a72359', --> changeSet = (vmodl.query.PropertyCollector.Change) [ --> (vmodl.query.PropertyCollector.Change) { --> name = "latestPage["job-8"].activeTask", --> op = "assign", --> val = <unset> --> }, --> (vmodl.query.PropertyCollector.Change) { --> name = "latestPage["job-8"].lastRunCompleteTime", --> op = "assign", --> val = "2017-03-23T18:23:37.804029Z" --> }, --> (vmodl.query.PropertyCollector.Change) { --> name = "latestPage["job-8"].mostRecentError", --> op = "assign", --> val = (converter.fault.CloneFault) { --> faultCause = (vmodl.MethodFault) null, --> description = "Warning: Permanently added the ECDSA host key for IP address '[172.16.0.66]:33001' to the list of known hosts. --> Permission denied (publickey,gssapi-keyex,gssapi-with-mic). --> /bin/tar_1.28: This does not look like a tar archive --> /bin/tar_1.28: Exiting with failure status due to previous errors --> --> /usr/lib/vmware-converter/bin/ssh -z -F /usr/lib/vmware-converter/ssh.conf john@server12.london.comp.local -i /usr/lib/vmware-converter/helper.pem -p 33001 "sudo tar --one-file-system --sparse -C '/boot' -cf - ." | /bin/tar_1.28 --numeric-owner --delay-directory-restore -C '/mnt/p2v-src-root/boot' -y -xf - --> (return code 2)", --> msg = "An error occurred during the conversion: 'Warning: Permanently added the ECDSA host key for IP address '[172.16.0.66]:33001' to the list of known hosts. --> Permission denied (publickey,gssapi-keyex,gssapi-with-mic). --> /bin/tar_1.28: This does not look like a tar archive --> /bin/tar_1.28: Exiting with failure status due to previous errors --> --> /usr/lib/vmware-converter/bin/ssh -z -F /usr/lib/vmware-converter/ssh.conf john@server12.london.comp.local -i /usr/lib/vmware-converter/helper.pem -p 33001 "sudo tar --one-file-system --sparse -C '/boot' -cf - ." | /bin/tar_1.28 --numeric-owner --delay-directory-restore -C '/mnt/p2v-src-root/boot' -y -xf - --> (return code 2)'" --> } --> }, --> (vmodl.query.PropertyCollector.Change) { --> name = "latestPage["job-8"].numConsecutiveErrors", --> op = "assign", --> val = 1 --> }, --> (vmodl.query.PropertyCollector.Change) { --> name = "latestPage["job-8"].state", --> op = "assign", --> val = "deactivated" --> } --> ], --> } --> ], --> } --> ], --> truncated = <unset> --> } |
When checking the logs on the Linux server I get these logs:
| Header 1 |
|---|
[root@server12 john]# tail /var/log/secure Mar 23 18:20:26 server12 sshd[4895]: pam_unix(sshd:session): session opened for user john by (uid=0) Mar 23 18:20:26 server12 sshd[4895]: pam_unix(sshd:session): session closed for user john Mar 23 18:20:27 server12 sshd[4909]: Accepted publickey for john from 10.1.106.182 port 61617 ssh2: RSA d3:b9:c6:e5:3b:ee:06:28:e6:49:70:f2:3b:e4:ae:3b Mar 23 18:20:27 server12 sshd[4909]: pam_unix(sshd:session): session opened for user john by (uid=0) Mar 23 18:20:27 server12 sshd[4909]: pam_unix(sshd:session): session closed for user john Mar 23 18:22:31 server12 sshd[5374]: fatal: no hostkey alg [preauth] Mar 23 18:22:31 server12 sshd[5375]: Connection closed by 10.1.105.240 [preauth] Mar 23 18:22:31 server12 sshd[5376]: Connection closed by 10.1.105.240 [preauth] Mar 23 18:22:31 server12 sshd[5380]: Connection closed by 10.1.105.240 [preauth] Mar 23 18:22:31 server12 sshd[5382]: Did not receive identification string from 10.1.105.240 |
I did come across linux p2v conversion with wmware converter 6.1.1 where the user disabled the private key and switched to user name and password authentication. However, I wanted to know if its possible to P2V with PrivateKey and passphrase.
Any help will be much appreciated.
Kind regards,
mjt.
Converter version: 6.2.0 build-7348398
OS: Windows 10 Pro, 64Bit, Fall Creators Update, December patch installed
Tried to convert the powered machine into a vm. I used as destination system my Unix based NAS mapped to Windows. The converter wasn't able to lock the destination and started to loop.
I cancelled the process in order to use a USB drive as destination.
When I restarted the converter, I got the the error message "Permission to perform this operation was denied." both using the "Next>" button as well as pressing "View source datails..." on the Source System step of the wizard.
I rebooted the system, I uninstalled and reinstalled the converter - nothing changed. I assume the converter didn't remove a lock entry.
I'm frustrated, each support would be appreciated.
Thanks a lot,
Peter
Dear Team,
After manually installing the VMware vCenter Converter Standalone Agent on a Windows 2008 SBS server, the agent fails to start and gives the following message:
Windows could not start the VMware vCenter Converter Standalone Agent service on Local Computer. Error 1067: The process terminated unexpectedly.
The system log generates an error event with ID 7034: The VMware vCenter Converter Standalone Agent service terminated unexpectedly.
The vmware-converter-agent-2.log displays the following:
Section for VMware vCenter Converter Standalone, pid=16620, version=5.0.0, build=build-470252, option=Release
2012-07-26T16:24:58.532+02:00 [11852 info 'Default'] Initialized channel manager
2012-07-26T16:24:58.532+02:00 [11852 info 'Default'] Current working directory: C:\Program Files (x86)\VMware\VMware vCenter Converter Standalone
2012-07-26T16:24:58.555+02:00 [11852 info 'Default'] Trying converter_agent
2012-07-26T16:24:58.662+02:00 [11852 info 'Default'] Trying ufa_agent
2012-07-26T16:24:58.672+02:00 [11852 info 'Ufa'] Initializing SSL context
2012-07-26T16:24:59.748+02:00 [11852 info 'Default'] Vmacore::InitSSL: doVersionCheck = true, handshakeTimeoutUs = 20000000
2012-07-26T16:24:59.751+02:00 [11852 info 'Ufa'] Plugin initialized
2012-07-26T16:24:59.764+02:00 [11852 info 'Default'] CoreDump: Writing minidump
2012-07-26T16:25:02.833+02:00 [11852 panic 'Default']
-->
--> Panic: TerminateHandler called
--> Backtrace:
--> backtrace[00] rip 100f98fd (no symbol)
--> backtrace[01] rip 1004abe4 (no symbol)
--> backtrace[02] rip 1004b157 (no symbol)
--> backtrace[03] rip 101151d9 (no symbol)
--> backtrace[04] rip 1011528d (no symbol)
--> backtrace[05] rip 10107589 (no symbol)
--> backtrace[06] rip 6a93be99 (no symbol)
--> backtrace[07] rip 004012e8 (no symbol)
--> backtrace[08] rip 75d2c5e0 (no symbol)
--> backtrace[09] rip 7730d03e (no symbol)
--> backtrace[10] rip 7730d1ff (no symbol)
-->
2012-07-26T16:25:02.833+02:00 [11852 panic 'Default'] (Log recursion level 2) TerminateHandler called
Any idea how I can resolve this issue and get the agent running? Or at least a hint for further investigation?
Thanks!
Danny
Hello everyone,
I am trying to hot-P2V a Win8 64bit OS which came pre-installed on my new notebook (it's an OEM license so I don't have the OS installation discs and thus cannot create a VM from scratch).
Unfortunately, like many people before me, I experienced this error while reconfiguring the newly-created virtual hard disk.
I read that the cause of this problem is an inaccurate BCD configuration: VMware KB: P2V conversion using VMware Converter fails with the error: Unable to find the system volume, reconfigura…
This post states that I'm supposed to import the virtual machine to vCenter Server and repair the VM's BCD from there.
Unfortunately I do not own this software and tried to import the VM in VMware Converter and run "Configure Machine" to fix the BCD data but no, I get the same error.
I should also mention that I did NOT install VMware Tools on this VM.
I spent some time reading articles about what BCD actually is and I more or less understood WHAT to do but still need a hand on HOW to do it.
Comparing my BCD with my Control Panel --> Disk Management it looks like the partitions are laid out correctly:
the first is a Win rec. partition (400Mb), then you have the boot partition (260Mb) and then the OS partition (drive C:).
The Z: volume is merely a data partition where I put music and movies and was not included in the VM.
Finally, the D: volume is a Hewlett Packard rec. partition. - this was not included in the VM either.
The BCD says the {bootmgr} is '\Device\HarddiskVolume2', so it seems to mirror the Disk Management structure.
But I'm no expert at all so here I am, asking for help.
I am attaching VMware Converter's logs and screenshots of my Win8 BCD and Disk Management.
Apart from solving my issue I'm especially interested in understanding WHY this problem occurs so I can learn and be better prepared for the next time.
Thanks a lot for your help,
Regards.
Stef
As the subject notes, I'm trying to test out converting some physical systems to VMWare using Converter 5.5 Standalone. Running it on a Windows 7 system, and I'm attempting to convert a Linux system that's running CentOS6. The wizard goes through smooth, and the source information is pulls down all looks correct. The conversion starts, connects to the helper, and starts formatting the destination. Then, at 3%, the conversion fails with this error:
FAILED: A general system error occurred: connect (`192.168.8.232'): Network is unreachable connect (`192.168.8.232'): Network is unreachable connect (`192.168.8.232'):
Network is unreachable Network error. Host 192.168.8.232 key can't be retrieved. (return code 2)
192.168.8.232 in this case is the source system. It's up and running just fine, and I maintain a SSH connection the entire time, but for some reason this error keeps coming up and I'm not sure why.
The conversion prompts for the key initially when the process starts, so I'm not sure if the "key can't be retrieved" error is as result of the "network unrechable" error, or if the key error comes first before the network error. Either way, network connectivity is fine, and I'm stumped as to why it keeps failing at this point. Any thoughts?
Hello,
Could someone tell me how to solve this error?
Now I'm trying to convert a remote Windows XP to a virtual machine on ESXi.
The source system type is Powerd-on machine (remote) and its operating system is Windows XP. The destination host system is ESXi 5.5, and the target virtual machine version is 10.
When I start to my conversion, the error "fault.ManagedDiskOpenFault.summary" occur.
I can find message below, in gui.log.
YYYY-MM-20T15:34:17.329+09:00 [06344 verbose 'Default'] Getting VIM connection to "vmhost IP address"...
YYYY-MM-20T15:34:17.329+09:00 [06344 info 'Default'] Connecting to host "vmhost IP address" on port 443
YYYY-MM-20T15:34:17.329+09:00 [06344 info 'Default'] localVersion is: vim.version.version9
YYYY-MM-20T15:34:17.344+09:00 [06344 info 'Default'] Remote version is: vim.version.version9
YYYY-MM-20T15:34:17.344+09:00 [06344 verbose 'Default'] [VimApi] Local and Remote Version are the same. Talking with version vim.version.version9
YYYY-MM-20T15:34:17.360+09:00 [06344 info 'Default'] Authenticating user root
YYYY-MM-20T15:34:17.360+09:00 [06344 verbose 'HttpConnectionPool-000011'] HttpConnectionPoolImpl created. maxPoolConnections = 1; idleTimeout = 900000000; maxOpenConnections = 1; maxConnectionAge = 0
YYYY-MM-20T15:34:17.391+09:00 [06344 verbose 'Default'] VimConnectionStore stopping keepalive
YYYY-MM-20T15:34:17.391+09:00 [06344 info 'Default'] Scheduled timer canceled, StopKeepAlive succeeds
YYYY-MM-20T15:34:17.391+09:00 [06344 info 'vmomi.soapStub[11]'] Resetting stub adapter for server <cs p:066679e8, TCP:"vmhost IP address":443> : Closed
YYYY-MM-20T15:34:17.391+09:00 [06344 info 'wizardController'] FillPage()
YYYY-MM-20T15:35:51.414+09:00 [09208 error 'wizardController'] Unable to submit job: converter.fault.ManagedDiskOpenFault
YYYY-MM-20T15:35:51.414+09:00 [09208 verbose 'Locale'] Default resource used for 'ManagedDiskOpenFault.summary' expected in module 'fault'.
YYYY-MM-20T15:35:51.414+09:00 [10152 error 'ConversionState'] Submit job failed: fault.ManagedDiskOpenFault.summary
YYYY-MM-20T15:35:51.414+09:00 [10152 error 'ConverterWizardWindow'] Next/Finish failed: fault.ManagedDiskOpenFault.summary
YYYY-MM-20T15:44:48.625+09:00 [01572 verbose 'HttpConnectionPool-000003'] [RemoveConnection] Connection removed; cnx: <SSL(<io_obj p:0x03f872f0, h:-1, <TCP '0.0.0.0:0'>, <TCP '"vmhost IP address":443'>>)>; pooled: 0
YYYY-MM-20T15:47:31.361+09:00 [09800 verbose 'ConverterDataProviderImpl'] Converter::Client::Gui::Wizard::ConverterDataProviderImpl::PropertyCollectorThread: TimeoutException
YYYY-MM-20T15:50:54.196+09:00 [08832 verbose 'HttpConnectionPool-000002'] [RemoveConnection] Connection removed; cnx: <SSL(<io_obj p:0x042de330, h:-1, <TCP '0.0.0.0:0'>, <TCP '[::1]:443'>>)>; pooled: 0
service does not start:
error: Windows could not start the VMware vCenter Converter Standalone server service on local computer. Error 1067: The process terminated unexpectedly.
Server is Windows server 2008 SP1
Locale are set to US English
see excerpt from converter log.
error: invalid server locale specified
any ideas. I have already gone through:
KB 2302421, 1032339, 9727453
Try install with local admin account and domain account (domain admin) , same results