Hi,

I'm running my ESX 3.5 during the 60 days trial mode, and during this period I need to test our main servers in VM mode. For this reason I donloaded VMWare Converter 3.0.2u1 and converted two Win2003 server. But at the en of the job I was unable to login onto the new VMs because windows "must be activated". Is there a way to perform the conversion by exactly cloning the two systems, without asking for activation ? This conversion is for test only, so I cannot dismiss the real server by now. What I would like to do is convert the real server comlletely, keeping the same names, IP, etc, then switch off the real servers, power on the VMs and see if all goes ok. So, I will not run the real and virtual machine at the same time, but I need to keep the real servers ready and activated.

Is there a solution for this issue ? Thanks and bye, Stefano

I'm trying to convert a remote linux server, and have run into a problem. I launch VMware vCenter Converter Standalone and can successfully connect to the remote machine (by IP address or hostname). However, the next thing it does is give the following error:

There is no '/boot' directory mounted on the source machine. It is required to create a bootable virtual machine. Please mount the '/boot' directory on the source machine.

However, /boot is mounted, as shown when I use SSH to connect to the source machine (using the same user/pass as provided to VMware Converter) and run mount -l:

/dev/md0 on /boot type ext3 (rw) []

Anybody run into this problem before? Any suggested solutions? The source machine is running Centos 4 (RHEL 4 clone).

hello everyone,

I'm trying to convert a physical Windows 2008 R2 (SP1) to virtual, using Vmware vCenter Converter Standalone version 5.5 build 1362012, it fails at 1% (after around 40mins) with the following message

FAILED: Unable to create a VSS snapshot of the source volume(s). Error code:

2147754758 (0x80042306).

The windows systems has some LUNS (4 x various GB size each) from the SAN, being GUID Partition Table (GPT).  I went through the wizard typically, selecting  "powered on machine", destination "vmware workstation or other vmware virtual machine" selected vmware player 6.0.x and the target location being a LUN with 500GB space.

Now for data to copy I selected 3 of the LUNS (on which some database is residing) and put "Min size" option (but I have tried maintaining the size for different runs) to save on space.

Looking through the logs, i see the following errors

vmware-converted-server-1.log

2014-01-16T19:42:37.371-07:00 [08696 info 'Default'] [serviceWin32,416] vmware-converter-server service started

2014-01-16T19:42:51.006-07:00 [08696 info 'Libs'] [ADS] Get user name failed: 1332

2014-01-16T19:42:51.006-07:00 [08696 info 'Libs'] [ADS] GetTokenInformation failed: 1312

2014-01-16T19:42:51.115-07:00 [08696 info 'Default'] [user,874] Successfully authenticated user Administrator from this local machine (using pipe)

2014-01-16T19:43:38.898-07:00 [10116 info 'Libs'] [ADS] Get user name failed: 1332

2014-01-16T19:43:38.898-07:00 [10116 info 'Libs'] [ADS] GetTokenInformation failed: 1312

2014-01-16T19:43:39.023-07:00 [10116 info 'Default'] [user,874] Successfully authenticated user Administrator from this local machine (using pipe)

2014-01-16T19:43:39.647-07:00 [07628 info 'ThreadPool'] Thread enlisted

2014-01-16T19:44:26.152-07:00 [08696 error 'Ufa.HTTPService'] Failed to read request; stream: <io_obj p:0x0141b84c, h:-1, <pipe '\\.\pipe\vmware-converter-server-soap'>, <pipe '\\.\pipe\vmware-converter-server-soap'>>, error: class Vmacore::TimeoutException(Operation timed out)

2014-01-16T19:47:32.

vmware-converte-worker-1.log

2014-01-16T19:47:34.323-07:00 [07248 warning 'Default'] Disk number 1 has been skipped because of errors while reading partition table

2014-01-16T19:47:34.323-07:00 [07248 warning 'Default'] Disk number 1 has been skipped because of errors while reading dynamic disks header or LDM database is corrupted

2014-01-16T19:47:34.323-07:00 [07248 warning 'Default'] [MoveActiveDiskIfNeeded] GetFirstBootDisk failed, mntapi error: 176

2014-01-16T19:47:34.323-07:00 [07248 warning 'Default'] Partition:Invalid sector magic number.

2014-01-16T19:47:34.323-07:00 [07248 warning 'Default'] Partition:Invalid sector magic number.

2014-01-16T19:47:34.323-07:00 [07248 warning 'Default'] [PopulateCapabilities] Volume-based cloning was disabled due to: <no volumes are recognized>

..

2014-01-16T19:47:34.323-07:00 [07248 warning 'Default'] Partition:ERROR: MBR sector must be present and valid to initialize GPT disk.

2014-01-16T19:47:34.354-07:00 [07248 info 'Default'] Disk signature found 80a2884a-05e9-4c1b-81-3d-35-1b-a3-6c-4b-bc, disk size in sectors 225981112, sector size 512

2014-01-16T19:47:34.354-07:00 [07248 info 'Default'] Partition found type Efi System / unique 4078aaff-430e-4825-bf-07-67-c6-ab-a1-87-3f

...

2014-01-16T19:47:37.365-07:00 [07596 info 'ThreadPool'] Thread delisted

2014-01-16T19:47:37.412-07:00 [10164 info 'ThreadPool'] Thread enlisted

2014-01-16T19:47:37.459-07:00 [07696 info 'Default'] MNTAPI: Mounted volume \\.\vstor2-mntapi20-shared-444D494F3A49443AFFAA78400E432548BF0767C6ABA1873F03000000\ FS:<>

2014-01-16T19:47:37.584-07:00 [07696 info 'Default'] Error 0 while call GetVolumeInformation for \\.\vstor2-mntapi20-shared-444D494F3A49443AFFAA78400E432548BF0767C6ABA1873F03000000\ FS:<>

2014-01-16T19:47:37.677-07:00 [07696 info 'Default'] Error 0 while call GetVolumeInformation for \\.\vstor2-mntapi20-shared-444D494F3A49443AFFAA78400E432548BF0767C6ABA1873F03000000\ FS:<>

2014-01-16T19:47:37.755-07:00 [07696 info 'Default'] Error 0 while call GetVolumeInformation for \\.\vstor2-mntapi20-shared-444D494F3A49443AFFAA78400E432548BF0767C6ABA1873F03000000\ FS:<>

2014-01-16T19:47:37.849-07:00 [07696 info 'Default'] Error 0 while call GetVolumeInformation for \\.\vstor2-mntapi20-shared-444D494F3A49443AFFAA78400E432548BF0767C6ABA1873F03000000\ FS:<>

2014-01-16T19:47:37.942-07:00 [07696 info 'Default'] Error 0 while call GetVolumeInformation for \\.\vstor2-mntapi20-shared-444D494F3A49443AFFAA78400E432548BF0767C6ABA1873F03000000\ FS:<>

2014-01-16T19:47:38.052-07:00 [07696 info 'Default'] Error 0 while call GetVolumeInformation for \\.\vstor2-mntapi20-shared-444D494F3A49443AFFAA78400E432548BF0767C6ABA1873F03000000\ FS:<>

2014-01-16T19:47:38.098-07:00 [10164 info 'ThreadPool'] Thread delisted

2014-01-16T19:47:38.098-07:00 [03736 info 'ThreadPool'] Thread enlisted

I wonder if the converter is not able to work on GPT partitions ?  (i think I've seen some community threads about this problem using v.5.1, but using 5.5 should be solved ?)

Any help is appreciated. Thanks

Hello - during install of standalone converter on a Windows 7 Pro workstation I get the following error; install rolls back, does not complete. What is causing this?

Hello,

Could someone tell me how to solve this error?

Now I'm trying to convert a remote Windows XP to a virtual machine on ESXi.

The source system  type is Powerd-on machine　(remote) and its operating system is Windows XP. The destination host system is  ESXi 5.5, and the target virtual machine version is 10.

When I start to my conversion, the error "fault.ManagedDiskOpenFault.summary" occur.

I can find message below, in gui.log.

YYYY-MM-20T15:34:17.329+09:00 [06344 verbose 'Default'] Getting VIM connection to "vmhost IP address"...

YYYY-MM-20T15:34:17.329+09:00 [06344 info 'Default'] Connecting to host "vmhost IP address" on port 443

YYYY-MM-20T15:34:17.329+09:00 [06344 info 'Default'] localVersion is: vim.version.version9

YYYY-MM-20T15:34:17.344+09:00 [06344 info 'Default'] Remote version is: vim.version.version9

YYYY-MM-20T15:34:17.344+09:00 [06344 verbose 'Default'] [VimApi] Local and Remote Version are the same. Talking with version vim.version.version9

YYYY-MM-20T15:34:17.360+09:00 [06344 info 'Default'] Authenticating user root

YYYY-MM-20T15:34:17.360+09:00 [06344 verbose 'HttpConnectionPool-000011'] HttpConnectionPoolImpl created. maxPoolConnections = 1; idleTimeout = 900000000; maxOpenConnections = 1; maxConnectionAge = 0

YYYY-MM-20T15:34:17.391+09:00 [06344 verbose 'Default'] VimConnectionStore stopping keepalive

YYYY-MM-20T15:34:17.391+09:00 [06344 info 'Default'] Scheduled timer canceled, StopKeepAlive succeeds

YYYY-MM-20T15:34:17.391+09:00 [06344 info 'vmomi.soapStub[11]'] Resetting stub adapter for server <cs p:066679e8, TCP:"vmhost IP address":443> : Closed

YYYY-MM-20T15:34:17.391+09:00 [06344 info 'wizardController'] FillPage()

YYYY-MM-20T15:35:51.414+09:00 [09208 error 'wizardController'] Unable to submit job: converter.fault.ManagedDiskOpenFault

YYYY-MM-20T15:35:51.414+09:00 [09208 verbose 'Locale'] Default resource used for 'ManagedDiskOpenFault.summary' expected in module 'fault'.

YYYY-MM-20T15:35:51.414+09:00 [10152 error 'ConversionState'] Submit job failed: fault.ManagedDiskOpenFault.summary

YYYY-MM-20T15:35:51.414+09:00 [10152 error 'ConverterWizardWindow'] Next/Finish failed: fault.ManagedDiskOpenFault.summary

YYYY-MM-20T15:44:48.625+09:00 [01572 verbose 'HttpConnectionPool-000003'] [RemoveConnection] Connection removed; cnx: <SSL(<io_obj p:0x03f872f0, h:-1, <TCP '0.0.0.0:0'>, <TCP '"vmhost IP address":443'>>)>; pooled: 0

YYYY-MM-20T15:47:31.361+09:00 [09800 verbose 'ConverterDataProviderImpl'] Converter::Client::Gui::Wizard::ConverterDataProviderImpl::PropertyCollectorThread: TimeoutException

YYYY-MM-20T15:50:54.196+09:00 [08832 verbose 'HttpConnectionPool-000002'] [RemoveConnection] Connection removed; cnx: <SSL(<io_obj p:0x042de330, h:-1, <TCP '0.0.0.0:0'>, <TCP '[::1]:443'>>)>; pooled: 0

I have a server with windows server 2000 OS.I want to converter  this server become a VM in the vmware platform.How can I do this?

Hello Support

I used kvm, but  I need to migrate to VMware Workstation 11 and images of vmx 

The kvm used qcow2 images.

I tried

qemu-img convert  /media/Secure_HDD/images/Virtual_Client_for_Linux_Windows_7-KVM-2.qcow2 -O vmx win7.vmx

but the linux command returns..

Unknown file format 'vmx'

Is there any migration option?

Thank you!

Anyone ever try to P2V a physical server that has iSCSI attached LUNs?  I have several that I need to P2V, all are 2000, or 2003 Windows server.  I need to make the LUNs Virtual disk when I P2V the servers.

Any tips would be very helpfull.

Thanks,

-geob

I'm trying to do a really simple conversion from Windows Server 2008 R2 SP1 to ESXi machine version 8. It seems to copy okay, but on the first VM boot it does an NTFS disk check and finds a bunch of errors.

All major services are stopped (APC Powerchute, Windows Deployment Services, Backup Exec Agent) and the antivirus uninstalled. chkdsk has been run on the source hardware and found no problems.

And yet after the migration I see this on first boot:

Checking file system on C:

The type of the file system is NTFS.

One of your disks needs to be checked for consistency. You may cancel the disk check, but it is strongly recommended that you continue.

Windows will now check the disk.                       

CHKDSK is verifying files (stage 1 of 3)...

The attribute of type 0x80 and instance tag 0x3 in file 0xe08c has allocated length of 0x1fec00000 instead of 0x1fecc0000.

Deleting corrupt attribute record (128, $J) from file record segment 57484.

Attribute record of type 0x80 and instance tag 0x3 is cross linked starting at 0x11a for possibly 0x1 clusters.

Some clusters occupied by attribute of type 0x80 and instance tag 0x3 in file 0xe120 is already in use.

Deleting corrupt attribute record (128, "") from file record segment 57632.

  199936 file records processed.

File verification completed.

  885 large file records processed.

  0 bad file records processed.

  0 EA records processed.

  104 reparse records processed.

CHKDSK is verifying indexes (stage 2 of 3)...

  262480 index entries processed.

  Index verification completed.

  0 unindexed files scanned.

  0 unindexed files recovered.

CHKDSK is verifying security descriptors (stage 3 of 3)...

  199936 file SDs/SIDs processed.

Cleaning up 8 unused index entries from index $SII of file 0x9.

Cleaning up 8 unused index entries from index $SDH of file 0x9.

Cleaning up 8 unused security descriptors.

Security descriptor verification completed.

Inserting data attribute into file 57632.

  31274 data files processed.

CHKDSK is verifying Usn Journal...

Creating Usn Journal $J data stream

Usn Journal verification completed.

CHKDSK discovered free space marked as allocated in the volume bitmap.

Windows has made corrections to the file system.

  70936575 KB total disk space.

  50582732 KB in 152611 files.

    97136 KB in 31274 indexes.

        0 KB in bad sectors.

    269927 KB in use by the system.

    65536 KB occupied by the log file.

  19986780 KB available on disk.

      4096 bytes in each allocation unit.

  17734143 total allocation units on disk.

  4996695 allocation units available on disk.

Internal Info:

00 0d 03 00 59 ce 02 00 ac 1e 05 00 00 00 00 00  ....Y...........

d1 00 00 00 68 00 00 00 00 00 00 00 00 00 00 00  ....h...........

00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................

Windows has finished checking your disk.

Please wait while your computer restarts.

There is absolutely NO WAY that I am going to use this resulting conversion as our primary organization file server. Such corruption of the NTFS partition data is completely unacceptable. I have no way of knowing what "file record 57484 / 57632" are and if they are critical to the operation of the server.

Though I expect I already know what the problem is, and I cannot solve it by using VMWare Converter running on the Windows I'm trying to migrate.

Trying to copy a file system while it is in use is just inviting disaster because as you're copying data, something before or after wherever the copy is occurring may change so that the final copy result ends up being corrupted.

The only way to really prevent this mid-copy data corruption is to copy the partitions when they are not in use.

Trying to P2V a Win 2008 R2 machine. Largest Physical disk is 2 TB. Yes dynamic disks. Not re-sizing, Failed at 96% after more than 2 days

Here's what I found in the worker log (attached)

2014-11-02T20:34:32.355-08:00 [09880 info 'task-1'] GetManagedDiskName: Get disklib file name as vpxa-nfcssl://[DataStore] [MachineName]_3-000002.vmdk@[HostName]:902!52 92 92 fc 65 6a fb b3-81 c1 cd f4 83 68 a8 29

2014-11-02T20:34:33.652-08:00 [09880 warning 'Default'] [,0] [NFC ERROR] NfcFssrvrProcessErrorMsg: received diskLib error 18 from server: NfcFssrvrOpen: Failed to open '[DataStore] [MachineName]-000002.vmdk': The parent virtual disk has been modified since the child was created. The content ID of the parent virtual disk does not match the corresponding parent

2014-11-02T20:34:33.652-08:00 [09880 info 'Default'] Sysimgbase_DiskLib_OpenWithPassPhrase failed with 'The parent virtual disk has been modified since the child was created. The content ID of the parent virtual disk does not match the corresponding parent content ID in the child' (error code:18)

2014-11-02T20:34:33.652-08:00 [09880 info 'Default'] Error 18 opening disk vpxa-nfcssl://[DataStore] [MachineName]-000002.vmdk@[HostName]:902!52 fb 2e 73 fc 7f cb 0a-aa d4 66 33 f4 4f 99 aa.

2014-11-02T20:34:33.652-08:00 [09880 warning 'Default'] ERROR 18 opening disk vpxa-nfcssl://[DataStore] [MachineName]-000002.vmdk@[HostName]:902!52 fb 2e 73 fc 7f cb 0a-aa d4 66 33 f4 4f 99 aa.

2014-11-02T20:34:33.652-08:00 [09880 error 'task-1'] [BaseDiskSetComputer::DoOpen] OpenDisks failed, mntapi error: 290

2014-11-02T20:34:33.652-08:00 [09880 error 'task-1'] [BaseDiskSetComputer::AnalyzeErrorAndThrow] Error occurred when opening disk set, MNTAPI_ERROR = 290 MNTAPI errorType = 2, errorCode = 18

2014-11-02T20:34:33.652-08:00 [09880 error 'task-1'] TaskImpl has failed with std::Exception: Platform-specific error 18

2014-11-02T20:34:33.652-08:00 [09880 info 'task-1'] TargetVmManagerImpl::DeleteVM

Please let me know if you've seen this before? Multiple searches turned up nothing

Hello friends, how are you?

I'm trying to convert a physical machine with Redhat 3 have the latest version of VMware vCenter Converter (5.5.3)

On the machine with Redhat I have the firewall disabled, the IP as the name resolves well and are within the same network as the host.

At one point, after partition and format the disk on the target server, I get the following error in the log:

FAILED: On a general system error occurred:

Network error. Host 192.168.0.142 key can not be retrieved. (return code 2)

Can someone help me?

Thanks a lot!

What's the best way to remove the team after the conversion?  You can't open the Broadcom utility because no adapters exist.  If you try to remove the BASP Virtual Adapter from the device manager it says "failed to uninstall the device.  The device may be required to boot up the computer"

Hello,

I tried a P2V from an RH4 server using Vmware Converter standalone 4. I did an 'online server' conversion.

The source server was using LVM for almost all partitions. I notice on the converted virtual machine that no LVM configuration was here. The converter only took the LVM partition and replicated it to normal partiiton on the destination -&gt; NO more LVM on the VM.

I tried to lookup on the KB or forums, but was not able to find anyone talking about that....

Is the conversion LVM to LVM supported at this time? or is there another way to do it with the Converter?

Thanks, Sylvain

I have done several p2v conversions of Redhat 4 servers to our ESX environment. However, when I did a few this past weekend the process I had been using no longer would work.

The process I use is:

1. Load VMware converter (4.0.1 build 161434) onto the physical linux host and allow remote access.

2. Using the vmware converter standalone client on my desktop, I connect to converter on the Linux server and set up the conversion.

3. When configuring the helper image I specify an unused IP address, along with our dns servers and dns suffix. We do not have DHCP servers on our production networks.

Normally this works fine, the conversion starts, and the helper VM image is created and boots an image that takes care of the copying. However, now the image never boots up and my helper VM is stuck at the PXE boot screen and eventually tells me operating system not found.

Any ideas?

Bill

Can someone from VMware shed some light on this message?  I'm trying to do some basic automation of VM deployments via the VMware Converter to ESXi servers.  Currently running the 4.0.1 Standalone Converter with some very basic machines.

command line used:

converter-cli -s e:\p2vxml\dns01.xml

where dns01.xml contains:

All based on the examples in the documentation.  Adding a spectype attribute generates another erro (expected "=")

So the situation resumes to two questions :

1.  Is there any way to convince VMware Converter Standalone 4.0 to P2V a Workstation VM at the command line to ESXi and/or

2. What's the best way to automate/script the deployment of a Workstation VM (or a manual copy of an ESX VM) to ESXi?

Hello.

I am trying to p2v an Ubuntu 10.04 x64 server using vCenter Converter Standalone version 4.3 to a host running ESXi 4.1. The layout of my physical server is such:

Disk /dev/sda: 159.5 GB, 159450660864 bytes
255 heads, 63 sectors/track, 19385 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00030a8c

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *           1         244     1951744   83  Linux
Partition 1 does not end on cylinder boundary.
/dev/sda2             244         730     3906560   82  Linux swap / Solaris
Partition 2 does not end on cylinder boundary.
/dev/sda3             730       19386   149853184   83  Linux

No LVM in use. When I perform the conversion it fails at 99%. The converter log shows:

[2011-02-15 15:20:49.588 07708 info 'App'] [task,373] [task-5] -- ERROR -- Convert: converter.fault.CloneFault
(converter.fault.CloneFault) {
   dynamicType = <unset>,
   faultCause = (vmodl.MethodFault) null,
   description = "GrubInstaller::InstallGrub: /usr/lib/vmware-converter/installGrub.sh failed with return code: 127, and message:
/vmware-updateGrub.sh: 38: grub: not found
Error running GRUB
Error running vmware-updateGrub.sh through chroot into /mnt/p2v-src-root
",
   msg = "",
}

I cannot start the VM. I followed instructions I found at http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1021306 and http://communities.vmware.com/message/1395202#1395202 with no success.

What I have found, based on exploring the system after using the Ubuntu 10.04 ISO to boot from, is that the drive structure has been maintained in the new VM, but there is nothing in /boot. I ran apt-get install grub2  and the legacy udpater command as per one of the above threads, and it created a /boot/grub directory but no grub.cfg. I then ran upgrade-grub and it created grub.cfg but still no joy.

The source OS is listed in the compatibility guide so I'm not sure why this isn't working, but I'm hoping someone can help me figure out a way to make this work. I'm so close, and it'd be really great to be able to use this. I appreciate your ideas and suggestions.

Thanks.

I have an old windows 2000 workstation that has important data on it.  The database cannot be migrated to anything newer, so i must preserver the data for historical purposes.  I tried converter standalone, but it tells me it will not run on windows 2000.  How can i physical to virtual this thing?  Any help will be much appreciated.

Hello,

In trying to do a P2V conversion I am getting a very weird kernel error. I am using the 5.1 standalone converter. The error is:

FAILED: An error occurred during the conversion: ' * got kernel major revision as ERROR:
kernel version has to be in format 2.6.*, version 2.6.32-358.6.1.el6.x86_64 is not supported (return code 1)'

I have searched and found no information on this error. I have added a screenshot, any help would be appreciated.

Thanks

I keep getting this error and i have checked all the steps with the helper VM and it gets stuck at 1% then errors after about three hours this is with a static IP for the helper address. converter 5.1 is what i'm using

Thanks!

Hello:

I am converting physical machines to VM sot hat we can consolidate our environment. The converter V5.1.0 Build1087880 fails at 71%, with a Warning:

so far, I have good progress on other physical machines except for this stubborn XP -X64 machine. We need to keep it for legacy reasons until there are replacement apps for all sw running on it (; This machine has SSD drive and no spinning HD

each time the conversion is able to start and complete the first on two drives. The GUI states its fine , but the log shows

2013-08-11T09:00:00.782-04:00 [02748 warning 'Default'] Disk number 1 has been skipped because of errors while reading partition table

2013-08-11T09:00:00.782-04:00 [02748 warning 'Default'] Disk number 1 has been skipped because of errors while reading dynamic disks header or LDM database is corrupted

When it gets to the second drive, I stops as it cant read some sector block.

2013-08-11T09:00:00.782-04:00 [02748 warning 'Default'] Disk number 2 has been skipped because of errors while reading partition table

2013-08-11T09:00:00.782-04:00 [02748 warning 'Default'] Disk number 2 has been skipped because of errors while reading dynamic disks header or LDM database is corrupted

 

2013-08-11T10:16:13.706-04:00 [04324 error 'task-2'] BlockLevelVolumeCloneMgr::ReadAndSkipBadBlocks():

Error (type: 2, code: 27) reading 223232 bytes starting at 0x000000069377f000 from the source volume D:

2013-08-11T10:16:53.800-04:00 [04324 error 'task-2'] BlockLevelVolumeCloneMgr::ReadAndSkipBadBlocks():

Error (type 2, code: 27), detected bad sector at offset 0x0000000693796000 on the source volume D:

I have run several apps to check and fix the D drive, but none find any issues. the XP-X64 machine has been restated after each test and re run. no issues are found on either drive

I have tried to run the converter without  the D drive. It wont let me do so as it states that the D drive Is critical to the conversion and wont proceed without it

I have attached GUI screen shots and two logs files

Can anyone please help?

Is there is a way to find the root problem or proceed?

if windows cant find an issue with  the D Drive why does the converter?